If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Does any one have the idea how To reset the drum counter of Canon IR Adv C3320 ?
uclbph
The life (displayed in %) can be checked by the following service mode:
COPIER > COUNTER > LF > Y/M/C/K-DRM-LF : Drum counter life display (Y/M/C/Bk)
COPIER>COUNTER>DRBL-1
PT-DRM Drum Unit (Bk) parts counter
Level.1
Details = Drum Unit (Bk)
1st line: Total counter value from the previous replacement
2nd line: Estimated life value
Use case = When checking the consumption level of parts/replacing the parts
Adj/set/operate method = To clear the counter value: Select the item, and then press Clear key.
To change the estimated life value: Select the item, enter the value, and then press OK key. Caution = Clear the counter value after replacement.
Display/adj/set range = 0 to 99999999
Unit = 1 sheet
Default value = 0
also----------------------
PT-DR-Y Drum Unit (Y) parts counter
PT-DR-M Drum Unit (M) parts counter
PT-DR-C Drum Unit (C) parts counter
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment