Inserting from large paper deck/POD count as a click charge?
Hi guys
Have a few machines coming that are a little too big so I will be unable to test before they go to the customer...
One is an imagePRESS C750 with a POD - customer currently has an inserter unit on a C7065, but was sold the press with a pod and finisher - no inserter. Can he expect the meter to increase running a cover through the fuser? Or is there a service mode for this?
Have a few machines coming that are a little too big so I will be unable to test before they go to the customer...
One is an imagePRESS C750 with a POD - customer currently has an inserter unit on a C7065, but was sold the press with a pod and finisher - no inserter. Can he expect the meter to increase running a cover through the fuser? Or is there a service mode for this?