Hello
I bought large format printer IPF710 from a company who stored this printer for 2 years.
there vere 3 printheads included which I think they are all faulty.
First I had a problem with clodged ink line which i solved with som window cleaning on amonia base.
Now the ink is flowing nicely. I also diped the heads in this cleaning solution (only in 3mm of deep cleaning solution in a basin)
For the first head the printer is not detecting it, I am not sure why is that
When I change to a second head it instantly tells me that there is no paper in the printer (but I have paper in) And paper fedding roler stops wourking then it gives me softwear error code 03130031-2f2a and sometimes 2f16
then I change to the third head which was clodged the moste and cleaning solution did not clean everything and I soked the head for 24hours. To clean completly I used exacto knife. Then I think i kiled the head when I pulled the tip of a knife along the nozzels. Now I can see that ink is slowly starts dripping from the head. But printer acepts this head and starts to replenish ink and it uses alot of ink but the progress bar does not move.
I hope that I will get new printhead tomorow or at least on monday and I will se what will happened.
What do you think is the third head ruined?
Is is somehow possible that printheads have some other memmory of the machine and shows faulty sensors and so on?
Can I repair that, somehow resseting printhead memory?
Could anybody help?
Thank you for your time and effort in advance.
And sorry that my english is not wery good.
Have a nice day,
Luka
I bought large format printer IPF710 from a company who stored this printer for 2 years.
there vere 3 printheads included which I think they are all faulty.
First I had a problem with clodged ink line which i solved with som window cleaning on amonia base.
Now the ink is flowing nicely. I also diped the heads in this cleaning solution (only in 3mm of deep cleaning solution in a basin)
For the first head the printer is not detecting it, I am not sure why is that
When I change to a second head it instantly tells me that there is no paper in the printer (but I have paper in) And paper fedding roler stops wourking then it gives me softwear error code 03130031-2f2a and sometimes 2f16
then I change to the third head which was clodged the moste and cleaning solution did not clean everything and I soked the head for 24hours. To clean completly I used exacto knife. Then I think i kiled the head when I pulled the tip of a knife along the nozzels. Now I can see that ink is slowly starts dripping from the head. But printer acepts this head and starts to replenish ink and it uses alot of ink but the progress bar does not move.
I hope that I will get new printhead tomorow or at least on monday and I will se what will happened.
What do you think is the third head ruined?
Is is somehow possible that printheads have some other memmory of the machine and shows faulty sensors and so on?
Can I repair that, somehow resseting printhead memory?
Could anybody help?
Thank you for your time and effort in advance.
And sorry that my english is not wery good.
Have a nice day,
Luka
Comment