Hello
I have a Canon ipf8300s. Recently it gives thin yellow lines across a print out even when the print is only pure b&w.
I tried head Clean A (several times)
Head Clean B (several times)
Nozzle Check. The nozzle check printout showed yellow lines across the test page and the fine grid lines in the test were wobbly for Yellow
I then tried Head Adjustnent and the print out from this was crispy and showed yellow and all other colours fine.
When I went to print again the yellow lines appeared again.
I left the printer for 2-3 hours and tried 3 A2 sized prints - they were good and no problem.
Then the 4th print had broader yellow streaks.
Would this be a print head issue which needs a replacement
Please help ! thanks for any ideas
Rob
I have a Canon ipf8300s. Recently it gives thin yellow lines across a print out even when the print is only pure b&w.
I tried head Clean A (several times)
Head Clean B (several times)
Nozzle Check. The nozzle check printout showed yellow lines across the test page and the fine grid lines in the test were wobbly for Yellow
I then tried Head Adjustnent and the print out from this was crispy and showed yellow and all other colours fine.
When I went to print again the yellow lines appeared again.
I left the printer for 2-3 hours and tried 3 A2 sized prints - they were good and no problem.
Then the 4th print had broader yellow streaks.
Would this be a print head issue which needs a replacement
Please help ! thanks for any ideas
Rob