Canon iRA C5235A - E540-8002

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MFPTech
    Trusted Tech

    250+ Posts
    • Nov 2010
    • 486
    #1

    Canon iRA C5235A - E540-8002

    Hi,

    This Canon iRA C5235A had the error E540-8002 intermittently and now it's consistent.
    Took finisher apart, checked and cleaned sensors, re-seated the connectors on the Finisher PCB, inspected the tray 1 motor, etc.
    The Finisher Tray 1 moves up and down normally during the machine start up and then errors so I am thinking of replacing the Finisher PCB but i go by the axiom "it's never the board"....

    Any ideas please?

    Thanks in advance!
    Tags: None
    • techandtrader
      Trusted Tech

      Site Contributor
      250+ Posts
      • Jun 2016
      • 327
      #2
      Re: Canon iRA C5235A - E540-8002

      http://www.copytechnet.com/forums/ca...sing-flag.html
      I have used Canon Imagerunner parts for sale. Most are floor model Color and / Advances Imagerunner with some 3025 3235 parts. Several intact machines being parted.

        Comment

        • techandtrader
          Trusted Tech

          Site Contributor
          250+ Posts
          • Jun 2016
          • 327
          #3
          Re: Canon iRA C5235A - E540-8002

          Code Occurs on the Staple Finisher-C1
          The E540 code is for the M107 motor problem but re wrapping the springs for this sensor can also cure it.

          In this case, an addition wrap on the paper surface sensor PI114 flags resolved this symptom.
          I have used Canon Imagerunner parts for sale. Most are floor model Color and / Advances Imagerunner with some 3025 3235 parts. Several intact machines being parted.

            Comment

            • PCC.TONER
              Technician
              • Mar 2017
              • 13
              #4
              Re: Canon iRA C5235A - E540-8002

              Originally posted by MFPTech
              Hi,

              This Canon iRA C5235A had the error E540-8002 intermittently and now it's consistent.
              Took finisher apart, checked and cleaned sensors, re-seated the connectors on the Finisher PCB, inspected the tray 1 motor, etc.
              The Finisher Tray 1 moves up and down normally during the machine start up and then errors so I am thinking of replacing the Finisher PCB but i go by the axiom "it's never the board"....

              Any ideas please?

              Thanks in advance!
              ----------------------------------------------

              Hi,

              Try to solve as follows:

              1. The tray 1 shift area sensor PCB is faulty.
              2. The wiring between the finisher controller PCB and tray 1 shift motor is faulty.
              3. The tray up/down mechanism is faulty.
              4. The tray 1 shift motor (M107) is faulty.
              5. The finisher controller PCB is faulty.

              Hope useful for you.

              Linda



              -----------------------------------------------------------
              china spare part, Toner chip, Copier parts, Toner Cartridge - einmay toner

                Comment

                • MFPTech
                  Trusted Tech

                  250+ Posts
                  • Nov 2010
                  • 486
                  #5
                  Re: Canon iRA C5235A - E540-8002

                  Originally posted by PCC.TONER
                  ----------------------------------------------

                  Hi,

                  Try to solve as follows:

                  1. The tray 1 shift area sensor PCB is faulty.
                  2. The wiring between the finisher controller PCB and tray 1 shift motor is faulty.
                  3. The tray up/down mechanism is faulty.
                  4. The tray 1 shift motor (M107) is faulty.
                  5. The finisher controller PCB is faulty.

                  Hope useful for you.

                  Linda



                  -----------------------------------------------------------
                  china spare part, Toner chip, Copier parts, Toner Cartridge - einmay toner
                  Yeah, that is what the manual suggests.

                  Sent from my SM-G903W using Tapatalk

                    Comment

                    Previous template Next
                    Working...