[Misc] Insert N1 image-press

[dracon]

Hello everyone.
I have a problem with an image-press c850. Today I uninstalled an N1 inserter but the machine keeps asking me to connect the inserter to the machine.
I have tried almost everything but the only thing left for me to do is a clear dc-com.
Any ideas?.
Thank you

[20 year tech]

Re: Insert N1 image-press

you need to execute ACCPST in service mode Copier > Function > Misc-P > ACCPST



ACCPST 1 Acceptance of delivery option config
Detail
To make the host machine recognize the delivery option being connected.
Execute this item when the connected delivery option is removed.
In a case where an option is added, it is recognized automatically; therefore, there is no need to
execute this item.
Use Case
When the connected delivery option is removed
Adj/Set/Operate Method
Select the item, and then press OK key.
Caution
Unless this item is executed after removal of delivery option, a message indicating that the
equipment cannot be recognized appears every time the power is turned ON.
Display/Adj/Set Range
During operation: ACTIVE, At normal termination: OK, At abnormal termination: NG

[dracon]

Re: Insert N1 image-press

thank very much.