problem ip 7000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Joseph2011
    Technician

    50+ Posts
    • Aug 2011
    • 88
    #1

    problem ip 7000

    good morning
    I have problems with ina imagepress 7000 in magenta and yellow colors on the prints are dropped developer (new developers) I have cleaned the laser and changed the drum yellow. And the temperature of the drum marks me -58 degrees in the four colors


    regards
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: problem ip 7000

      Originally posted by Joseph2011
      good morning
      I have problems with ina imagepress 7000 in magenta and yellow colors on the prints are dropped developer (new developers) I have cleaned the laser and changed the drum yellow. And the temperature of the drum marks me -58 degrees in the four colors


      regards
      [QUOTE temperature of the drum marks me -58 degrees in the four colors][/QUOTE]

      Do you see the droppings on the ITB.

      Is issue of droppings on outside edges of paper

      Check that the Mylar seals for the cleaning lamps and the preconditioning lamps are not damaged and allow toner to pack in front of the lamps.
      Have you checked the DRUM Seals
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • Joseph2011
          Technician

          50+ Posts
          • Aug 2011
          • 88
          #3
          Re: problem ip 7000

          Originally posted by teckat
          [QUOTE temperature of the drum marks me -58 degrees in the four colors]


          Do you see the droppings on the ITB.

          Is issue of droppings on outside edges of paper

          Check that the Mylar seals for the cleaning lamps and the preconditioning lamps are not damaged and allow toner to pack in front of the lamps.
          Have you checked the DRUM Seals

          [/QUOTE]

          good morning
          I have reviewed what I indicated and apparently everything is fine previously almost 2 months ago has changed drum and development units, crowns

            Comment

            Previous template Next
            Working...