iRadv c3330 .... dead machine, making a clicking noise when switched on

[clivealive]

Re: iRadv c3330 .... dead machine, making a clicking noise when switched on

Thanks for contributions guys ... turned out to be a trapped wire shorting to frame, and flipping powersupply.

[apoxi]

Re: iRadv c3330 .... dead machine, making a clicking noise when switched on

Hi guys, I've been asked to look at a machine that has been reported as not working, only makes a clicking noise when switched on.
I'm going to look at it tomorrow, has anyone had power supply issues with these machines?
If I don't get any replies, I'll post my findings.

I had this problem (green light on, black screen). Replacing the disc resolving the problem.

[teckat]

Re: iRadv c3330 .... dead machine, making a clicking noise when switched on

Hi guys, I've been asked to look at a machine that has been reported as not working, only makes a clicking noise when switched on.
I'm going to look at it tomorrow, has anyone had power supply issues with these machines?
If I don't get any replies, I'll post my findings.

---

Sounds like a Relay Arching__turning on n' off.

Is 120vAC measured coming into the AC Driver PCB ?

Always replace Relay pcb n' ACdriver as a pair, eliminate headaches.

[clivealive]

Hi guys, I've been asked to look at a machine that has been reported as not working, only makes a clicking noise when switched on.
I'm going to look at it tomorrow, has anyone had power supply issues with these machines?
If I don't get any replies, I'll post my findings.