Canon IR 3300 Control Panel Repair

[anderson]

Re: Canon IR 3300 Control Panel Repair

remove the adhesive tape from the key contacts and polish the metal parts, the circuit you can clean with clean contact spray, then put another tape to the same size that was removed

any doubt send me an email


aejpereira28@yahoo.com.br

[dan7777]

Re: Canon IR 3300 Control Panel Repair

Hi every body
i have canon IR3300 , it's working good , but there are some important switch doesn't work ,( like * and 2,8)
so i disassembly it and try to fix , but it doesn't work
please , i ask for help , how can i fix it ?
thanks

You can take the buttons off and put on ones from a used panel, I have done that. If you make copies the 2 and 8 keys don't work? The other posts say to put in a used board. Those machines are really old and parts are harder to get.

[zoraldinho]

Re: Canon IR 3300 Control Panel Repair

It's hard to repair. Buy used one.


Used & Original Control Panel For Canon Printers Ir3300,For Canon Printer Spare Parts - Buy For Canon Printers,For Canon Printer Spare Parts,Control Panel Lcd For Canon Printers Ir3300 Product on Alibaba.com

[adel_nathan]

Re: Canon IR 3300 Control Panel Repair

some switches not response whatever copy or service mode
no one stuck
it's need to clean, adjust and fix
please , i need to know how can i fix them ?

[zoraldinho]

Re: Canon IR 3300 Control Panel Repair

If you can use 2 or 8 button for copy job and not for the service mode then the panel is not broken!

Try *49*

Check if any key has been stuck.

[adel_nathan]

Hi every body
i have canon IR3300 , it's working good , but there are some important switch doesn't work ,( like * and 2,8)
so i disassembly it and try to fix , but it doesn't work
please , i ask for help , how can i fix it ?
thanks