canon ir advance c5045i

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • lilleputte
    replied
    Re: canon ir advance c5045i

    If you have Buffer Pass Unit-G1 installed but no finisher.

    1. COPIER > OPTION > ACC
    2. IN-TRAY to "1"
    3. Paper output settings

    Output Tray Designation - Canon imageRUNNER ADVANCE C5255/C5250/C5240/C5240A/C5235A e-Manual

    Leave a comment:


  • Drcopy
    replied
    Re: canon ir advance c5045i

    Roho is on the money, block that sensor and it should be fine.

    Leave a comment:


  • roho
    replied
    Re: canon ir advance c5045i

    A sensor arm has been removed, likely this had a finisher at one point. You need to take a flashlight and look at the back of the paper delivery area, you will see a small area to your right that likely has a small cover removed and you will likely see a sensor there. You may simply block it, should feed paper then.

    Leave a comment:


  • adi1986
    replied
    Re: canon ir advance c5045i

    Originally posted by NEOTECH
    hi dear i perches used irc5045i copier machine when i make copy machine display massage remove paper from output try my machine is no finisher installed without finisher basic copier
    how can i solved this problem.
    any one help me.
    thanks
    Did this machine came with external fiinishing unit?

    Leave a comment:


  • NEOTECH
    started a topic [Misc] canon ir advance c5045i

    canon ir advance c5045i

    hi dear i perches used irc5045i copier machine when i make copy machine display massage remove paper from output try my machine is no finisher installed without finisher basic copier
    how can i solved this problem.
    any one help me.
    thanks
Working...