If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
thanks you. i will try to disconnect all connector and reconnect again i will update you if something happen. thanks.
Leave a comment:
Guest replied
Re: canon ir adv 6255
saludos amigo, me paso un problema similar el detalle estaba en la main controler no hacia buen contacto las conecciones solo desconecte y conecte de nuevo. anteriormente ya la abian checado otro tecnico le faltaban unos tornillos y por lo mismo quedaba lebantada la placa y no hacia buen contacto suerte saludos
canon ir advance 6255 no power. when i turn on the machine theres no power led that turns on in control panel even the lcd. and when i check the pcbs at the back the ip main green led lights turns on. is there anything i need to check at power supply or at the ac drive? i check fuse at ac drive they are all have continuities. any body has expirience on this please help me.
Leave a comment: