Adv C3325/3330

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • repeatcopiers
    Senior Tech

    Site Contributor
    500+ Posts
    • Sep 2008
    • 591

    Adv C3325/3330

    I have a chance to purchase a few of these Adv C3330 copiers and wondered if there are any good/bad reviews. For some reason, I haven't seen any of these in the field yet. Is it a decent copier? I'm guessing its an upgrade to the C2225/2230, but it doesn't look like its built the same as far as drum units, developer unit etc.
  • doktor
    Trusted Tech

    100+ Posts
    • Jan 2010
    • 212

    #2
    Re: Adv C3325/3330

    Good machine ! The same concept as IR ADV C 5XXX series.I like him.

    Comment

    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 7918

      #3
      Re: Adv C3325/3330

      I look after a few of these & not had any issues so far, drums go way over 100% easy to work on & a vast improvemnt to the IRAC20/22xx series!
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk

      Comment

      • spree
        Trusted Tech
        • Jun 2012
        • 207

        #4
        Re: Adv C3325/3330

        Hello all.
        Problem with printing grey dots (see photo).
        It makes at all C, M, Y, Bk pattern printed all together, also only M print alone, also only Y print alone, also only C print alone, also only Bk print alone (maybe not so significantly).
        I checked all drums, transfer belt, fixing unit (it makes in front off fixing unit, I make stop the paper in front of fixing unit), transfer roller was vacuumed - but still the grey dots. Visually nothing (charging rollers at drums perfectly clear without defects).
        I forgot to change drums in its positions (now I am not sure, that the drums are interchangeable). The black developing unit looks good, but...
        The dots are in the direction of the paper path.
        I did not know, what is faulty (and did not say it to customer).
        Any ideas please?
        IMG_1601.jpg

        Comment

        • doktor
          Trusted Tech

          100+ Posts
          • Jan 2010
          • 212

          #5
          Re: Adv C3325/3330

          Try- change black drum.

          Comment

          • copier tech
            Field Supervisor

            5,000+ Posts
            • Jan 2014
            • 7918

            #6
            Re: Adv C3325/3330

            Originally posted by spree
            Hello all.
            Problem with printing grey dots (see photo).
            It makes at all C, M, Y, Bk pattern printed all together, also only M print alone, also only Y print alone, also only C print alone, also only Bk print alone (maybe not so significantly).
            I checked all drums, transfer belt, fixing unit (it makes in front off fixing unit, I make stop the paper in front of fixing unit), transfer roller was vacuumed - but still the grey dots. Visually nothing (charging rollers at drums perfectly clear without defects).
            I forgot to change drums in its positions (now I am not sure, that the drums are interchangeable). The black developing unit looks good, but...
            The dots are in the direction of the paper path.
            I did not know, what is faulty (and did not say it to customer).
            Any ideas please?
            [ATTACH=CONFIG]61743[/ATTACH]

            Looking at the spacing of those marks I would say it's caused by the black dev unit.
            Let us eat, drink, and be merry, because tomorrow we may die!

            For all your firmware & service manual needs please visit us at:

            www.copierfirmware.co.uk - www.printerfirmware.co.uk

            Comment

            • j2980kh
              Technician

              50+ Posts
              • Mar 2009
              • 69

              #7
              Re: Adv C3325/3330

              developer ass'y

              Comment

              • Saturn
                Trusted Tech

                Site Contributor
                100+ Posts
                • Nov 2023
                • 147

                #8
                Re: Adv C3325/3330

                Originally posted by repeatcopiers
                I have a chance to purchase a few of these Adv C3330 copiers and wondered if there are any good/bad reviews. For some reason, I haven't seen any of these in the field yet. Is it a decent copier? I'm guessing its an upgrade to the C2225/2230, but it doesn't look like its built the same as far as drum units, developer unit etc.
                The iR ADV C3325i/3330i are good and reliable machines, almost all maintenance parts and toners are still used in the successor models.
                I don't care about who your father is, as long as I'm fishing here, you won't walk on water.

                Comment

                • copier tech
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2014
                  • 7918

                  #9
                  Re: Adv C3325/3330

                  Originally posted by Saturn
                  The C3325i/3330i are good and reliable machines, almost all maintenance parts and toners are still used in the successor models.
                  I'm sure after 5+ years the original poster has come to a decision by now!
                  Let us eat, drink, and be merry, because tomorrow we may die!

                  For all your firmware & service manual needs please visit us at:

                  www.copierfirmware.co.uk - www.printerfirmware.co.uk

                  Comment

                  • Saturn
                    Trusted Tech

                    Site Contributor
                    100+ Posts
                    • Nov 2023
                    • 147

                    #10
                    Re: Adv C3325/3330

                    Thanks copier tech, I hadn't noticed that
                    I don't care about who your father is, as long as I'm fishing here, you won't walk on water.

                    Comment

                    Working...