IR 3300 Not Printing

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • copier tech
    replied
    Re: IR 3300 Not Printing

    It can happen.

    When was the machine lasted serviced/cleaned? could be large amounts on toner inside the machine.

    WHAT IS THE MAIN COUNT ON?

    Leave a comment:


  • princepriyu
    Guest replied
    Re: IR 3300 Not Printing

    Originally posted by copier tech
    What is the main counter on?

    From your sample it looks like the dev unit is shorting to to the drum.

    Replace the dev unit.
    but it prints fine after some time may be after 10-12 blank pages ??
    is this possible even when problem is with dev unit

    Leave a comment:


  • copier tech
    replied
    Re: IR 3300 Not Printing

    Originally posted by princepriyu
    when i start my machine IR3300 for the first time every day it does not print. it's happening since few days
    it prints a BLANK page i even tried photocopy / print from computer and even its configuration print from its report settings.
    all BLANK pages. in early morning or even when machine not used for 6-7 hours
    (PLEASE CHECK IMAGE ATTACHMENT)
    can someone track the problem

    to eliminate the problem i'v even tried changing
    PCR (Positive Charging Roller)
    DRUM
    but even though same problem persists

    [ATTACH=CONFIG]42598[/ATTACH]



    [ATTACH=CONFIG]42599[/ATTACH]

    Thanks
    What is the main counter on?

    From your sample it looks like the dev unit is shorting to to the drum.

    Replace the dev unit.

    Leave a comment:


  • princepriyu
    started a topic IR 3300 Not Printing

    IR 3300 Not Printing

    when i start my machine IR3300 for the first time every day it does not print. it's happening since few days
    it prints a BLANK page i even tried photocopy / print from computer and even its configuration print from its report settings.
    all BLANK pages. in early morning or even when machine not used for 6-7 hours
    (PLEASE CHECK IMAGE ATTACHMENT)
    can someone track the problem

    to eliminate the problem i'v even tried changing
    PCR (Positive Charging Roller)
    DRUM
    but even though same problem persists

    Blank Printing (1).jpg
    Blank Printing (2).jpg

    Thanks
Working...