Impressions do not reach the server in Canon C1

[wcanonw]

Re: Impressions do not reach the server in Canon C1

Hello, did you change the interface cable (FH2-7188) that connects the machine to the server?

[wcanonw]

Re: Impressions do not reach the server in Canon C1

Hello, did you change the interface cable (FH2-7188) that connects the machine to the server?

Hello, you already tried changing the interface cable, the other thing would be to get another sata hard drive of the same capacity or higher, format at a low level, place it on the server and install system software.
Another question is the driver that is installed on the pc is version 1.01? and what operating system the computer has. I would recommend that you get system software 2.0

[Xtn_2]

Re: Impressions do not reach the server in Canon C1

Hi, i change the server for another and.... and the problem continues and gets worse: Now the machine does not lift (boot).

[wcanonw]

Re: Impressions do not reach the server in Canon C1

you can indicate with photos about the current problem of the machine