How to move c5045

[John-r]

How to prepare for transport? Its an old machine so servicetech is not an alternative as they are more expensive than the machinevalue.

It also have booklet finisher and hole puncher, how to remove that?

[copier tech]

Re: How to move c5045

How to prepare for transport? Its an old machine so servicetech is not an alternative as they are more expensive than the machinevalue.

It also have booklet finisher and hole puncher, how to remove that?

This is a very heavy machine I would recommend you get a professional in.

[John-r]

Re: How to move c5045

This is a very heavy machine I would recommend you get a professional in.

The weight is ok, the question is what els must be done to the machine so it does not get damaged

[copier tech]

Re: How to move c5045

The weight is ok, the question is what els must be done to the machine so it does not get damaged

How you move the machine depends on how far, up stairs, using an elevator etc?

Here's how to remove the finisher.

https://mega.nz/file/cFcB2AyJ#wfBUCA...imlhIlBpxuTiME


You should also read the service manual, installation section.

https://mega.nz/file/0V92hSIR#06nlje...q2JAnub3079SLE

[John-r]

Re: How to move c5045

It will be moved to another building with a trailer.

Have looked in the service manual but do not find anything specific about moving. whether drums, tonerbottle or similar must be removed and if any transport locks inside.

How you move the machine depends on how far, up stairs, using an elevator etc?

Here's how to remove the finisher.

https://mega.nz/file/cFcB2AyJ#wfBUCA...imlhIlBpxuTiME


You should also read the service manual, installation section.

https://mega.nz/file/0V92hSIR#06nlje...q2JAnub3079SLE

[John-r]

Re: How to move c5045

It will be moved to another building with a trailer.

Have looked in the service manual but do not find anything specific about moving. whether drums, tonerbottle or similar must be removed and if any transport locks inside.

[copier tech]

Re: How to move c5045

It will be moved to another building with a trailer.

Have looked in the service manual but do not find anything specific about moving. whether drums, tonerbottle or similar must be removed and if any transport locks inside.

There is nothing specific you need to remove or unlock.

However I remove the process unit, DF & fuser to reduce weight. I have even taken the scanner off to make it easier to carry up 3 flight of stairs.

Just remove the finisher & keep it upright while transporting & try not to crush in when strapping in.

[John-r]

Re: How to move c5045

Thank you, that were all I need to know, then I think it will go well I hope

[copier tech]

Re: How to move c5045

Thank you, that were all I need to know, then I think it will go well I hope

No worries, as I said before this is a heavy beast but as you can now have the service manual you can locate the lifting handles etc.

Good luck & if you have time post a before/during/after picture.