If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There is no E602-1111. I found E602-0111. It's "File System Error on the HDD"
Description: Error in file system writing after startup, I/O error occurred in the file system after startup
1. Turn OFF and then ON the main power.
2. Perform the procedure to enter service mode, Select the following to enter 4: [1]:CHK-TYPE = 4, and select and execute the following: [2]:HD-CHECK = 1; and then turn OFF and ON the power.
3. Start in safe mode to format the HDD (all the data in the HDD is erased).
4. Replace the HDD.
Thank you I am dealing with a middle man so the code must have been miswritten.
Comment