Not Printing in straight line

[Gab]

Re: Not Printing in straight line

Is scaner at the optics moves smoothly? Check it.

[tsbservice]

Re: Not Printing in straight line

Looks like you may have 2 separate problems. Like others said Laser unit and probably developer unit mag roller.

[KenB]

[allan]

Re: Not Printing in straight line

There are snake skin patterns on that print. Some arching somewhere?
Seen this kind of thing but without the funky zig-zaging.
A voltage leak from the mag roller to the drum somehow.
In your pic you can see its only from one end.


Wow its the weirdest thing i have seen in a while.
Where it arch from the one end it draws a void to the other.
The zig-zag looks like an added effect.

[blackcat4866]

Re: Not Printing in straight line

Have you checked dv unit for vertical lines problem.


Sent from my iPad using Tapatalk

His images are LEF. That's the laser motor speed varying. All laser as far as I'm concerned. =^..^=

[Brian8506]

Re: Not Printing in straight line

Have you checked dv unit for vertical lines problem.


Sent from my iPad using Tapatalk

[Brian8506]

Re: Not Printing in straight line

Looks like you also have a drum problem. Did you put in a new OEM?


Sent from my iPad using Tapatalk

tried with two new OPC drums
NO CHNAGE
Prints same

[Brian8506]

Re: Not Printing in straight line

Looks like you also have a drum problem. Did you put in a new OEM?


Sent from my iPad using Tapatalk

[Brian8506]

Re: Not Printing in straight line

Laser unit.


Sent from my iPad using Tapatalk

[princepriyu]

Canon IR 3300
Not Printing in straight line
printing ZIG ZAG even when i do a photocopy or print from a PC
Looking at this I have replaced with a brand new OPC DRUM
but problem is unsolved
Printing Problem.jpgPrinting Proble.jpg