Canon C3530i

[copytech,mike]

Re: Canon C3530i

replace the development unit with a new one from canon.

do not ever respond to me ever again. Do not ever send me any messages of any sort. I do not want to be your friend. -michael.

[copytech,mike]

Re: Canon C3530i

aww poor little wimp you are intimidated by a cartoon pic? Are you a secret muslim? my pic is an AR15 muslims use AR-47/74 a way more powerful weapon.

bet you (living in MD) haven't even HELD a firearm... guns don't kill people STUPID liberals with guns kill people...

do you know rifles are used less frequently in shootings than pistols? My AR15 isn't even as powerful as my 40cal semiauto pistol

hell more killings are committed by people using knives and hammers that firearms. So if you are going to talk about firearms make damn fucking sure you have the FACTS to back up your bullshit because

My facts don't give a FUCK about your wimpy ass feelings.

check out these facts about who gets killed more by cops....

PHIL has just been reported. Please note his strong profanity that he highlighted in red. I predict he's going to be banned because Copytech.net knows exactly who i am. -Michael. (Konica Minolta Factory Certified).

[copytech,mike]

Re: Canon C3530i

An attitude like that will not help you when Aneurysm finally has time to check those posts that techs have reported for any reason. You have made a total of 78 posts when I just checked. Of those 52 have been made in the last 2 days.Half of those have been on this thread.

If you look at the information below the avatars you will see a line that indicated Rep Power: which stands for Reputation Power. You have 0. Phil has 350 at last check and I have 398. You have also confused blackcat with phil. BC has a rep power of 359. BC and phil are also both monetary contributors. Aneurysm will consider those factors when deciding who to moderate. And guess what, you lose.

My reputation score is zero but i can fix a copier. You can't.

[slimslob]

Re: Canon C3530i

I think its looking real good for me. You have no power on here at all. Now be gone.

An attitude like that will not help you when Aneurysm finally has time to check those posts that techs have reported for any reason. You have made a total of 78 posts when I just checked. Of those 52 have been made in the last 2 days.Half of those have been on this thread.

If you look at the information below the avatars you will see a line that indicated Rep Power: which stands for Reputation Power. You have 0. Phil has 350 at last check and I have 398. You have also confused blackcat with phil. BC has a rep power of 359. BC and phil are also both monetary contributors. Aneurysm will consider those factors when deciding who to moderate. And guess what, you lose.

[copytech,mike]

Re: Canon C3530i

Replace the development unit with a new one from Canon.

Ok Mr parts changer.

[copytech,mike]

Re: Canon C3530i

you have been here since 2014...
1)you have spent more time here in the past three days than all the other time combined ...
2)you have raised more hell in those 3 days...
3)you have a ton of RED CARDS ....
4)you have been reported by more people in those three days than the majority of other people..

frankly it's not really looking that good for you

I think its looking real good for me.

[copytech,mike]

Re: Canon C3530i

you have been here since 2014...
1)you have spent more time here in the past three days than all the other time combined ...
2)you have raised more hell in those 3 days...
3)you have a ton of RED CARDS ....
4)you have been reported by more people in those three days than the majority of other people..

frankly it's not really looking that good for you

I think its looking real good for me. You have no power on here at all. Now be gone.

[Phil B.]

Re: Canon C3530i

Dont think i will be deleted.

you have been here since 2014...
1)you have spent more time here in the past three days than all the other time combined ...
2)you have raised more hell in those 3 days...
3)you have a ton of RED CARDS ....
4)you have been reported by more people in those three days than the majority of other people..
5) you have argued/insulted 3 senior techs that are held in high regard here at CTN

frankly it's not really looking that good for you

[Phil B.]

Re: Canon C3530i

Dont think i will be deleted.

you have been here since 2014...
1)you have spent more time here in the past three days than all the other time combined ...
2)you have raised more hell in those 3 days...
3)you have a ton of RED CARDS ....
4)you have been reported by more people in those three days than the majority of other people..

frankly it's not really looking that good for you

[copytech,mike]

Re: Canon C3530i

Based from what I have seen reading through this thread, when the admin gets time to review the reports on this thread copytechmike will be deleted from this website.

FYI, SEF and LEF stand for Short Edge Feed and Long Edge Feed. I learned that at the first instructor lead class I attended which was over 20 years ago. It help identify where marks on prints are in the direction of the feed or across the direction of the feed.

Dont think i will be deleted.

[slimslob]

Re: Canon C3530i

Any way to fix the Dev high spot?

Replace the development unit with a new one from Canon.

[copytech,mike]

Re: Canon C3530i

Imagerunner Advanced Colour C3530i? Switch black drum with yellow. Still there? Replace the black dev assembly., as "copier tech" suggested. A dirty laser path would lighten the image, not cause a semi-repetitive "spot-black" grey line. Itb cleaning failure would give a brownish waste toner coloured(process black/grey) line. A Test 10 would have been nice from service mode. As suggested, change the black dev

Thanks. I agree. Blk dev unit. Yes, if i swich drums around its still there. I saw a slight high spot on the mag roller once but seemed to go away. Going back to check it again. Maybe i can shake it back and forth. Doctor blade is ok. That developer mix might not be even in the housing. Copier got moved while back agao. Maybe it got tilted. Gonna look for 1/2 wide high spot on roller. Dev unit rated at 240k. I hate to pay 400 for new unit.

[copytech,mike]

Re: Canon C3530i

Anyway back on topic!

Check the k developer unit, I suspect from your print samples you have a build on the dev roller this would explain when you get this band when printing yellow only.

An ITB cleaning issue would produce thick often brown lines not a think band.

Any way to fix the Dev high spot?

[copytech,mike]

Re: Canon C3530i

Anyway back on topic!

Check the k developer unit, I suspect from your print samples you have a build on the dev roller this would explain when you get this band when printing yellow only.

An ITB cleaning issue would produce thick often brown lines not a think band.

Maybe your right. I looked at the blk dev unit and the brush looks ok. I can go back and check it again. Any fix for it? Im running out of money on this thing. Only has 75k on it.

[copytech,mike]

Re: Canon C3530i

Does it do it on test print page

yep.