If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Potential for E020 0xB8 or 0x12 error at install on IR ADV DX C58xx range
Re: Potential for E020 0xB8 or 0x12 error at install on IR ADV DX C58xx range
That looks like it would be really common. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Re: Potential for E020 0xB8 or 0x12 error at install on IR ADV DX C58xx range
Also the connector of the toner concentration sensor (developer) comes off. E021-0x20/ E020-0xB8/ E996-0CAB
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Comment