Hi
Have this 5550 (111), only 4k on it. Overhauled this machine, updated firmware all good. Was told to put on a PDI image for a customer, then management decided it was the wrong image. Initialize all data, and now the machine seems confused, certain functions are greyed out, if you copy from glass or dadf it will not copy, it won't print a 123 report, but does pg types. Replaced main controller and HDD, still same, MMI clear, it will load firmware, but above issues remain. Format HDD and flash pcb, still same. Canon UK says the PDI Image hasn't cleared properly, but whatever attempt to clear it, fails to get machine back to being operational. Any ideas?
Have this 5550 (111), only 4k on it. Overhauled this machine, updated firmware all good. Was told to put on a PDI image for a customer, then management decided it was the wrong image. Initialize all data, and now the machine seems confused, certain functions are greyed out, if you copy from glass or dadf it will not copy, it won't print a 123 report, but does pg types. Replaced main controller and HDD, still same, MMI clear, it will load firmware, but above issues remain. Format HDD and flash pcb, still same. Canon UK says the PDI Image hasn't cleared properly, but whatever attempt to clear it, fails to get machine back to being operational. Any ideas?