[Jamming] Canon DX3725i Jam 010b Tray 1 only

[DSharpe]

Good morning, All! I have a DX3725i that only jams from tray 1. Anywhere from 30 to 50 copies and stops maybe 1/2 out of tray and all other sheets have exited. Since it was only tray 1 I decided to replace the entire feed unit with no change. Any recommendations?

[MunsterTech]

I've had this a few times, and found replacing the pick up assy small sorts it out. FM1-B500 if my memory serves me

[GG CANON]

Gear breaking in lifting unit

[José Vallvé Chillida]

hay un boletín sobre eso
es el micro switch de detección de la puerta latetal

[nicknt82]

Good morning, All! I have a DX3725i that only jams from tray 1. Anywhere from 30 to 50 copies and stops maybe 1/2 out of tray and all other sheets have exited. Since it was only tray 1 I decided to replace the entire feed unit with no change. Any recommendations?

If you have already replaced entire feed unit. check right door if it not close tightly. Try to make some more pressure by your hand when make a print


image.png