iR5540 skew

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • copicatt
    replied
    Thanks for the input. Problem solved. Found a tiny strip of a label around the front end of the “driven” registration roller. Took some more looking to notice it. It was causing consistent crooked pages. Flame away!

    Leave a comment:


  • GG CANON
    replied
    I will start by checking the registration, then the transfer belt unit is working fine, the bering bushing, then the laser unit

    Leave a comment:


  • copicatt
    started a topic iR5540 skew

    iR5540 skew

    Have a customer that has reported crooked pages. I went by and it is definitely skewed as much as an 1/8 to a 1/4 inch. After multiple tests, I have found it is skewing on prints and copies (glass and feeder). Internal test prints skew also. This happens from all paper trays just the same. And it is also consistently skewed the same amount every page. Also happens on all colors. Anyone know of a tech pub or maybe Somoen has had this issue? Has me a little baffled. You can see in my example the bottom of the page.
    Attached Files
Working...