Canon 4545 J1 finisher

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Joe Foe from Buffalo
    Trusted Tech
    • Feb 2009
    • 385
    #1

    [Misc] Canon 4545 J1 finisher

    Problem is not from the machine took the J1 finisher put it on a different machine same problem. Only happens on single copies/prints and is random.
    Watch these videos till the end.
    Canon J1 issue - Google Photos
    Tags: finisher, problem, random, single
    • Joe Foe from Buffalo
      Trusted Tech
      • Feb 2009
      • 385
      #2
      Re: Canon 4545 J1 finisher

      Tried taking a educated guess.. replaced the paddel drive assembly fm1-p348-010

        Comment

        • techandtrader
          Trusted Tech
          Site Contributor
          250+ Posts
          • Jun 2016
          • 314
          #3
          Re: Canon 4545 J1 finisher

          When I read about these I found a lot of complaints about the paddles. Cuts and obstructions on the side interfere. When you identify one that has been beat up you can swap it with the one on the outside that doesnt normally touch the paper. Paddles are slipping or binding. I would think a filing down the sides of the plastic would help too.
          I have used Canon Imagerunner parts for sale. Most are floor model Color and / Advances Imagerunner with some 3025 3235 parts. Several intact machines being parted.

            Comment

            Previous template Next
            Working...