Hi All,
I have an issue with a 7280i that I hope someone can assist with,
the device is missing a small gear drive Assy, that drives the "Roller Assy, Paper Feed, Left" (FM3-9916-000),
under "Internal Components 5" in the manual, as illustrated below.
Fr2.jpg
As you can see some parts of the Drive Assy are not listed in the manual, and so they cannot be ordered.
I believe there used to be some "special" part number allocated in the past, but have since been discontinued?
I hoped to find the parts in the newer model, iR ADV C7580i but the Assy has been removed/upgraded and is not the same,
if you look in the 7580i manual, under "Internal Components 5" you will see the parts are not even depicted.
As a result this device cannot do any prints from the left high capacity tray and cannot run duplex, as the "left paper feed roller assy" is needed to run the pages through the duplex unit.
If anyone has or knows of someone with an old or scrapped device, that could possibly send me the parts, or put me in touch with someone who could,
it would be most appreciated.
Thank you all ...have a good done.....
I have an issue with a 7280i that I hope someone can assist with,
the device is missing a small gear drive Assy, that drives the "Roller Assy, Paper Feed, Left" (FM3-9916-000),
under "Internal Components 5" in the manual, as illustrated below.
Fr2.jpg
As you can see some parts of the Drive Assy are not listed in the manual, and so they cannot be ordered.
I believe there used to be some "special" part number allocated in the past, but have since been discontinued?
I hoped to find the parts in the newer model, iR ADV C7580i but the Assy has been removed/upgraded and is not the same,
if you look in the 7580i manual, under "Internal Components 5" you will see the parts are not even depicted.
As a result this device cannot do any prints from the left high capacity tray and cannot run duplex, as the "left paper feed roller assy" is needed to run the pages through the duplex unit.
If anyone has or knows of someone with an old or scrapped device, that could possibly send me the parts, or put me in touch with someone who could,
it would be most appreciated.
Thank you all ...have a good done.....
