Jams very often, but not every set. Mostly jam code 0045, but occasionally an 003 or 005 jam happens.This machine has only 78k on it and is in a very clean lawyers office with standard office temp and humidity.
I've replaced the pick-up roller, feed roller, sep roller, and sep pad assm (they were only at 37%), I decreased spring tension on the sep roller to the lowest adjustment position, cleaned all sensors, registration type rollers, and guides, and updated system software to newest version. I also re-seated all connectors on the ADF controller.
It's gotten better since doing all that, but still jams way more often than any similar machines I have in the field.
What else could cause it? One way bearing/collar by the sep roller?
I've replaced the pick-up roller, feed roller, sep roller, and sep pad assm (they were only at 37%), I decreased spring tension on the sep roller to the lowest adjustment position, cleaned all sensors, registration type rollers, and guides, and updated system software to newest version. I also re-seated all connectors on the ADF controller.
It's gotten better since doing all that, but still jams way more often than any similar machines I have in the field.
What else could cause it? One way bearing/collar by the sep roller?