Good morning everyone !
I have several problems with the canon V 1000:
- during the print run, the machine changes color;
- light bands and dark bands perpendicular to the direction of
paper feed;
- between side 1 and side 2 of the print, the machine moves the register
of the image.
I do the color adjustments and put the register between side 1 and side 2 back in place but after a couple of days I have the aforementioned problems again!
I updated the machine to the 10.01 firmware release, redid the settings, but I didn't solve anything!
Do you have any advice ?
Thank you !Canon V 1000.jpg
I have several problems with the canon V 1000:
- during the print run, the machine changes color;
- light bands and dark bands perpendicular to the direction of
paper feed;
- between side 1 and side 2 of the print, the machine moves the register
of the image.
I do the color adjustments and put the register between side 1 and side 2 back in place but after a couple of days I have the aforementioned problems again!
I updated the machine to the 10.01 firmware release, redid the settings, but I didn't solve anything!
Do you have any advice ?
Thank you !Canon V 1000.jpg