Canon IR 3300 Continous Restarting

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Canuck
    replied
    Re: Canon IR 3300 Continous Restarting

    Update the firmware for starters. Pull the boot ROM and any RAM out and clean the contacts with fine sandpaper and alcohol for starters...I've had it on this series(22/38/3300). Reseat Main con connectors,etc. If still having issues and hard drive is older, replace it.

    Leave a comment:


  • COPIERTEC ASSOCIATES
    replied
    Re: Canon IR 3300 Continous Restarting

    Originally posted by princepriyu
    Hello Friends
    i am using Canon IR 3300 photocopier past 9 years,
    since some days i am facing a problem, after starting the machine after some time it reboots itself.
    even while i start the machine sometimes it acts same, continuous reboots, as if i am turning the power off and on
    i hope you have understood my problem

    can anyone help me in this matter
    I met this problem a number of times and the solution to this would be changing the power supply board or the RAM and the problem could be solved.
    Since these are old machines,the power supply always get dry joints or the RAM wears off

    Leave a comment:


  • ADV COPIER
    replied
    Re: Canon IR 3300 Continous Restarting

    Originally posted by princepriyu
    Hello Friends
    i am using Canon IR 3300 photocopier past 9 years,
    since some days i am facing a problem, after starting the machine after some time it reboots itself.
    even while i start the machine sometimes it acts same, continuous reboots, as if i am turning the power off and on
    i hope you have understood my problem

    can anyone help me in this matter
    sound like PSU or Mainboard

    Leave a comment:


  • techandtrader
    replied
    Re: Canon IR 3300 Continous Restarting

    Its the Power Supply. Some of these machine got defective power supplys that were very sensitive to line noise. You can try a line conditioner but praying and changing the PSU is going to be the best.
    Dealers who were good got new PSUs from Canon if they were paying attention and asked for them.

    Leave a comment:


  • princepriyu
    Guest replied
    Re: Canon IR 3300 Continous Restarting

    Thanks for your reply

    it just restarts, no message or error code or any display on the screen
    even some times machine is on state showing the info but it is gets restarted but the display shows ON ready to operate
    i'l try to shoot a video for better explanation


    any way
    thanks a lot

    Leave a comment:


  • copier tech
    replied
    Re: Canon IR 3300 Continous Restarting

    Originally posted by princepriyu
    Hello Friends
    i am using Canon IR 3300 photocopier past 9 years,
    since some days i am facing a problem, after starting the machine after some time it reboots itself.
    even while i start the machine sometimes it acts same, continuous reboots, as if i am turning the power off and on
    i hope you have understood my problem

    can anyone help me in this matter


    When the device restarts do you have a message on the screen?

    Try updating / re-writing the system software.

    Leave a comment:


  • kuby
    replied
    Re: Canon IR 3300 Continous Restarting

    Sounds like the hard drive is going out.

    Leave a comment:


  • princepriyu
    started a topic [Electrical] Canon IR 3300 Continous Restarting

    Canon IR 3300 Continous Restarting

    Hello Friends
    i am using Canon IR 3300 photocopier past 9 years,
    since some days i am facing a problem, after starting the machine after some time it reboots itself.
    even while i start the machine sometimes it acts same, continuous reboots, as if i am turning the power off and on
    i hope you have understood my problem

    can anyone help me in this matter
Working...