IRA C3525 E00196-00f

[Larhal]

Hi All,

Could use a little insite to any possible causes for this. Manual states:

E196-000F-05 Communication error
Detection Description The number of read/write job data to the DCON EEPROM exceeded 100.
Remedy [Related parts]
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
[Reference]
Before replacing the DC Controller PCB, back up the service mode data and restore the backup
data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES.

Is it typically a DC PCB issue or are there hidden causes.

Thanks in advance for any help.

[Larhal]

Re: IRA C3525 E00196-00f

Strangely, I arrive at the site, power up the unit and no codes. Checked history and there were several E00196-00f codes. Checked and re seated all the connections on the DC PWB and associated harness just to insure it wasn't a weak connection. Ran 50 colour copies and no issues.
As I said, Strange.