Hello!
I am getting error 808 - 0001.
Machine is Advance C3525i II.
220V 50Hz, in parameters.
Practically, when booting, two unnatural relays are heard, vibrating for approx. 2 seconds. I delete the error in vain. It reappears. The machine does not send the paper to the oven. I checked the connections in the motor controller and the power supply, it is K. I tried the power board on another car, and it is faulty.
Basically, I have to fix it.
The board has the code FM1-P668-000000.
I really need the scheme or the experience of some colleagues on the forum.
I don't think that feeding the board separately the measurements will be conclusive, the board not being controlled by the CPU or other controllers.
If I power it on the desk, what voltages should I measure?
Thank you very much for the answers!
Cristian tehnicdti@gmail.com
I am getting error 808 - 0001.
Machine is Advance C3525i II.
220V 50Hz, in parameters.
Practically, when booting, two unnatural relays are heard, vibrating for approx. 2 seconds. I delete the error in vain. It reappears. The machine does not send the paper to the oven. I checked the connections in the motor controller and the power supply, it is K. I tried the power board on another car, and it is faulty.
Basically, I have to fix it.
The board has the code FM1-P668-000000.
I really need the scheme or the experience of some colleagues on the forum.
I don't think that feeding the board separately the measurements will be conclusive, the board not being controlled by the CPU or other controllers.
If I power it on the desk, what voltages should I measure?
Thank you very much for the answers!
Cristian tehnicdti@gmail.com