IR2020 Fan running

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PoonKing5000
    Trusted Tech

    100+ Posts
    • Jun 2008
    • 111
    #1

    IR2020 Fan running

    I have a IR2020 that the fan on the left side door continuously runs even when in sleep mode. Has anyone had a similar problem or does anyone know what causes that fan to run? I have cleaned out the housing and filter of the fan and the machine does not seem to be getting hot.

    Andy
    Tags: continuously, customer, door, fan, filter, hot, ir2020, lef, left, mode, replace, run, running, runs, side, sleep, time
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Originally posted by PoonKing5000
      I have a IR2020 that the fan on the left side door continuously runs even when in sleep mode. Has anyone had a similar problem or does anyone know what causes that fan to run? I have cleaned out the housing and filter of the fan and the machine does not seem to be getting hot.

      Andy

      FMI/ i believe this model has only one fan/ think it stays on while powered up
      that is an Exhaust Fan/ is it making noise ??
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • PoonKing5000
          Trusted Tech

          100+ Posts
          • Jun 2008
          • 111
          #3
          I never noticed before whether that fan stays on all the time. The customer claims that it used to shut off in sleep mode but now it does not. It didn't seem loud when I was at the machine but maybe it is louder than it was before.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Originally posted by PoonKing5000
              I never noticed before whether that fan stays on all the time. The customer claims that it used to shut off in sleep mode but now it does not. It didn't seem loud when I was at the machine but maybe it is louder than it was before.

              +remove the               fan filter /& keep it off
              and replace Fan

              FK2-1084-000= FM1 part #
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Previous template Next
                Working...