7105 Fuser Web not Turning

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blazebusiness
    SanDiegoCopierRepair.com

    Site Contributor
    1,000+ Posts
    • Apr 2010
    • 1250
    #16
    Give that man a cigar----thats exactly right. It distributes the wear of the thermistor across a wider surface area to extend fuser roller life.
    sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

      Comment

      • shazza
        Technician

        50+ Posts
        • Nov 2009
        • 96
        #17
        HIi,

        UPDATE,

        Spoke to Engineer on this fault and after months of replacing UFR/pwba/solenoids etc It turned out to be faulty connector block on end of unit 1. Replaced whole block and wiring loom to cure!!

        Thanks for replies.

        Shazza

          Comment

          • Canuck
            Tech Specialist

            1,000+ Posts
            • Nov 2007
            • 1713
            #18
            No they don't cam away on 7105 or any of its relatives. On 6800 color family it does when extra heating roller is cammed to upper fuser roll for warm up. Thats why you dont open the door and turn the fuser knob while it is warming up. You will get a web wrapped around UFR. Long weird web cloth path on those pigs. Web wraps are messy

              Comment

              Previous 1 2 template Next
              Working...