Encountered an IRC 5185 with duplex image reader G1. lower corner of the display said two-sided scanning is slower. DADF could do single pass duplex scanning anymore.
Tried an rcon clear en returned the adjust values. Tried a scanjob again, machines gives an E0225-0101 and after a reboot the first error message is back.
Viewed the operation, CIS lamp seems to work. Also the CIS glass moves to home position fine. Ofcourse i cleaned the CIS glass and white plate. Did rcon etc. again. Same error.
A month ago, this machine gave an E202, we replaced the adf controller fuse. fuse is fine now.
Any ideas. I'm gonna order a CIS and new Adf controller. Maybe a new CIS glass??
Tried an rcon clear en returned the adjust values. Tried a scanjob again, machines gives an E0225-0101 and after a reboot the first error message is back.
Viewed the operation, CIS lamp seems to work. Also the CIS glass moves to home position fine. Ofcourse i cleaned the CIS glass and white plate. Did rcon etc. again. Same error.
A month ago, this machine gave an E202, we replaced the adf controller fuse. fuse is fine now.
Any ideas. I'm gonna order a CIS and new Adf controller. Maybe a new CIS glass??
Comment