[Error Code] canon GP215 LCD problem !!!!

[sweet.persona]

hello all the techs

when i try to reseting Err 007-01 or anather err i can't ..


when i press ERROR in *4* the LCD is not highlight this mode and i can't reset it !!


what is the solution !!
It's the LCD damaged !! or locked !!!

helps me pleas.

[sweet.persona]

can any tech help me pleas

[Peter Sim]

can any tech help me pleas

Try to clean the LCD flat cable and reseat back .If is not working ,you will need to change the LCD.

[teckat]

hello all the techs

when i try to reseting Err 007-01 or anather err i can't ..


when i press ERROR in *4* the LCD is not highlight this mode and i can't reset it !!


what is the solution !!
It's the LCD damaged !! or locked !!!

helps me pleas.

E007-01
The fixing film has become fully
displaced.
• Fixing film (recovery mechanism
fault
• The displacement is not corrected after executing film recovery mode which turns on when the main power is tuned off and on in response to ‘E007’.

LCD-CHK
• checking for missing dots on LCD
1) Press ‘LCD-CHK’ to highlight.
2) Press the OK key.
• The entire face of the LCD reverses (white video;
keys and notations disappear).
3) Press the area where the OK key was shown.
• The entire face of the LCD reverses (black video).
4) Press the area where the OK key was shown.
• The LCD will return to normal status

[sweet.persona]

Great thanks For Our TEchs

MR peter Sim ..

• MR teckat
  
• MR marc.lucas

Thank you For all.

[teckat]

Great thanks For Our TEchs

MR peter Sim ..

• MR teckat
  
• MR marc.lucas

Thank you For all.

Thanks, what was your Fix Solution

[sweet.persona]

Hello friends.

well, i've followed its tracks and i sticked the line directly between (the burned line in the LCD ) directly to the DC controller . after that i reseted the copier.

this operation took 5 hours, but it was successfull .

[teckat]

computers17.gif

Love Operations