[Error Code] dadf s1-error code

[roho]

good day-I'm getting e202-0101 errors-swapped out the dadf and the code did not come up-thinking related to the dadf. Any ideas? thanks!

[zoraldinho]

Cause: Fault occurred in the motor, driver IC, or separation HP sensor. A fault occurred in the guide for glass move (in the case of the backside
optical glass motor)

101 Glass HP A fault occurred in outward HP positioning of the backside optical glass motor.
30mm at HP detection

[teckat]

good day-I'm getting e202-0101 errors-swapped out the dadf and the code did not come up-thinking related to the dadf. Any ideas? thanks!

check the operation of the Feeder's CIS unit with the front cover removed /
check for any non-movement or stall=if seen-use a light lube on the the 3 rails found under the Glass holder assembly.

[D_L_P]

I've seen a couple now that the black grease turns into glue on the gear shafts in the drive for the CIS glass. See #125, #126.

dadfs1.jpg

[charm5496]

Scanner motor FK2-0237-000 / Scanner HP sensor (PS501) FK2-0149-000 / Reader Controller pcb FM2-6801-000.

The controllers were an issue when the unit was first released blowing fuses. you may want to check there first