ir 6570 displyed code E 0004-0103

[mr.daus]

i have machine ir 6570 he is displyed code e 0004-0103
any body can help for this code ????

[zoraldinho]

i have machine ir 6570 he is displyed code e 0004-0103
any body can help for this code ????

The IH current is faulty. (no current)

- Check the connector for any fault in connection.
- Replace the fixing heater power supply.
- Replace the DC controller PCB.

[mr.daus]

The IH current is faulty. (no current)

- Check the connector for any fault in connection.
- Replace the fixing heater power supply.
- Replace the DC controller PCB.

i'm do this solution but not good
are the power suplay fixing heater can be repaired??

[zoraldinho]

Try to clear DC controller.Don't forget to Reset error!

Power supply also can be repaired but depend what's wrong with supply.

[waffu22]

Look at your fixing if heater lamp on. Check connector in fixing assembly

[mrfixit51]

As zoraldinho stated mid-sentence, make sure to try the reset procedure in service mode first, to see if you need to work further on this problem.

copier>function>clear>err

[vj200729]

better check supply voltage .is it 128 v at input of machine