imagePRESS C7010VP Series-Point to Note When Replacing DC Controller 1-1

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083
    #1

    [Misc] imagePRESS C7010VP Series-Point to Note When Replacing DC Controller 1-1

    Steps that should be followed when performing a DCON Clear in Service
    Mode or when replacing DC Controller 1-1 on the imagePRESS C7010VP Series. Failure to follow this procedure can lead to inaccurate adjustments during the Skew Correction procedure.

    see pdf>TP11-2.pdf
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**
    Tags: adjustments, clear, color, controller, dc controller, lead, pdf, roller, series, skew
    Previous template Next
    Working...