ir5075 E733-0010

[eurokris]

hi greeting to all

ir5075 came out eror code E733 -0010.pls help me.

thanks

[zoraldinho]

Re: ir5075 E733-0010

http://www.copytechnet.com/forums/ca...733-001-a.html

[rodrigo neres]

Re: ir5075 E733-0010

hello

There is a fault in the printer communication.

end: 0000 - the attempt at communication with the printer fails at start-up

end:0001 - there is a DDI-P communication error.

check the connection of the cable between the DC controller and the main controller.
check the power supply of the printer. (check to see if initialization takes place at start-up)
replace the DC controller PCB or the main controller PCB.

there, try taking memory cards and boot, and clean the contacts with rubber school. already solved such problems as well

so I'm having the same problem and not a ir6570 changing the font, scanner, motherboard box and resolvel. hope you have better luck

[MARDSO]

Re: ir5075 E733-0010

check the sensor PS24 whip it wont touch the housing of the machine which ultimately cutting it and causing a short circuit!

[teckat]

Re: ir5075 E733-0010

hi greeting to all

ir5075 came out eror code E733 -0010.pls help me.

thanks

-------------------------------
first try in service mode
COPIER>FUNCTION>CLEAR>ERR CLR-----power off/on

if no clear
Confirm Multicast discovery is turned off in Additional Functions>System>Network>TCP/IP>Multicast set to off (0).

Multicast discovery may cause machine to reboot, lock up and also when network cable is plugged in , generate E733/E732 codes.

u can also try to remove Memory DIMM > clean ends> re-seat

[teckat]

Re: ir5075 E733-0010

check the sensor PS24 whip it wont touch the housing of the machine which ultimately cutting it and causing a short circuit!

good point

PS24 Harness; part number, FG6-5454-000.

[MARDSO]

thanks

thank you! I have three machines that are with this code, this one bna fusion and the other two I'm still investigating!! thanks for the help! once you have a result post here!