imagePressC7000VP-Starter / Toner Spills from the Developer Assemblies (Revised)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083
    #1

    [Misc] imagePressC7000VP-Starter / Toner Spills from the Developer Assemblies (Revised)

    imagePressC7000VP-Starter / Toner Spills from the Developer Assemblies (Revised) Publication has been revised to include detailed diagrams showing the location of the imagePRESS C7000VP Series cooling and exhaust fans



    SEE pdf>>>TP11-1.pdf
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**
    Tags: assemblies, c 6000, config, cooling, developer, diagrams, location, pdf, series, showing, starter, toner
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      5,000+ Posts
      • Mar 2008
      • 5013
      #2
      Re: imagePressC7000VP-Starter / Toner Spills from the Developer Assemblies (Revised)

      Every two weeks must supply a new starter on ip c 6000.

      suecide.jpg
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • its_just_a_copier
          Trusted Tech
          • May 2011
          • 132
          #3
          Re: imagePressC7000VP-Starter / Toner Spills from the Developer Assemblies (Revised)

          Have you guys ever heard of a toner clumping problem in Yellow Only? I've replaced the developing unit several times along with yellow hopper, subhopper, pipe, Drum, corona, transfer roller, etc.... this problem comes back within a few days.

          I've heard it could be related to the various cooling fans and I'm pursuing that route now, just wondering if it could be related to installing the new IPC7010 versions of firmware like v82 or v87 ?

          Canon says its compatible with the old IPC7000's, but could this be the problem?

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: imagePressC7000VP-Starter / Toner Spills from the Developer Assemblies (Revised)

              Originally posted by its_just_a_copier
              Have you guys ever heard of a toner clumping problem in Yellow Only? I've replaced the developing unit several times along with yellow hopper, subhopper, pipe, Drum, corona, transfer roller, etc.... this problem comes back within a few days.

              I've heard it could be related to the various cooling fans and I'm pursuing that route now, just wondering if it could be related to installing the new IPC7010 versions of firmware like v82 or v87 ?

              Canon says its compatible with the old IPC7000's, but could this be the problem?

              Did u read the Tech Pub above / it deals with Fans-http://www.copytechnet.com/forums/at...sed-tp11-1.pdf
              FM113 Process unit cooling fan (Y)
              FM114 Process unit exhausting fan (Y)
              FM160 Process unit front side cooling fan (Y)
              FM161 Process unit rear side cooling fan(Y)
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • its_just_a_copier
                  Trusted Tech
                  • May 2011
                  • 132
                  #5
                  Re: imagePressC7000VP-Starter / Toner Spills from the Developer Assemblies (Revised)

                  yep thats what I'm checkin out now, just curious about the firmware.

                  I know Canon has recognized this problem because they beefed up the fans with the IPC7010...

                    Comment

                    Previous template Next
                    Working...