Canon IR-2220i Print Quality Issues

[teckat]

Re: Canon IR-2220i Print Quality Issues

Thank you for the help my issue is solved

HI guys good morning
I have image issue on the same printer
Color mismatch
Any idia? IMG_20191030_123909.jpg[/QUOTE]

---

is that a Copy off glass or internal Print/ or a Scanned Image ???
what does PG Test print look like ?
that is after u ran Color Miss-match on printer ??

Stop the copy when image is on the ITB assy and if all colors are misaligned, replace the ITB assy.

[Manoj ambatt]

Re: Canon IR-2220i Print Quality Issues

Thank you for the help my issue is solved[/QUOTE]

HI guys good morning
I have image issue on the same printer
Color mismatch
Any idia? IMG_20191030_123909.jpg

[Manoj ambatt]

Re: Canon IR-2220i Print Quality Issues

Good morning all
I tried this procedure but doesnt work itb doesnt move, is image runner 2220i is similar to you mensioned printers,
Thanks


Sent from my SM-N950U using Tapatalk

[/QUOTE]
Thank you for the help my issue is solved

[teckat]

Re: Canon IR-2220i Print Quality Issues

The ITB assembly cannot be removed

Problem : After the right door is lowered, the ITB assembly is stuck in the machine and cannot be removed. Solution : The door interlock was popped out of place, not allowing the right door to open properly, preventing the ITB assembly from being removed. Please see the photo below for the proper position of the door interlock. The circular tab had popped out of the rectangular space in the arm.

[Manoj ambatt]

Re: Canon IR-2220i Print Quality Issues

Good morning all
I tried this procedure but doesnt work itb doesnt move, is image runner 2220i is similar to you mensioned printers,
Thanks


Sent from my SM-N950U using Tapatalk[/QUOTE]

[teckat]

Re: Canon IR-2220i Print Quality Issues

Thank for quick responce
Image runner 2220i advanced

---

see attach

[Copylady72]

Re: Canon IR-2220i Print Quality Issues

Hi any body can help me please
How can I remove itb on ir2220i

Imagerunner advance C2020, C2030,C2225, C2230

Sent from my SM-N950U using Tapatalk

[Manoj ambatt]

Re: Canon IR-2220i Print Quality Issues

Is this an iRAdvanced model or old iR model

Thank for quick responce
Image runner 2220i advanced

[teckat]

Re: Canon IR-2220i Print Quality Issues

Hi any body can help me please
How can I remove itb on ir2220i

Is this an iRAdvanced model or old iR model

[Manoj ambatt]

Re: Canon IR-2220i Print Quality Issues

Hi any body can help me please
How can I remove itb on ir2220i

[Tech2002]

Re: Canon IR-2220i Print Quality Issues


Update -

Finally resolved the Copy Quality Issue I had. I'm not sure if the issue there was before cleaning out the system, but the Laser did have dirt on it. It was towards the backside of the machine, so my thinking is it might have been that way or got coated when we blew out the interior. What threw me was when I put the old Drum in everything was fine. Copy quality was great, put the new one in and things went bad - go figure. I appreciate the input from everyone.

Thanks!.

[Tech2002]

Re: Canon IR-2220i Print Quality Issues

Thanks for your input - When I get an answer, I'll let you (everyone) know what the outcome is. See if we can solve this mystrey.

[Tech2002]

Re: Canon IR-2220i Print Quality Issues

This isn't a machine I normally work on - Sharp is my main system. Having said this, I have found that the work I do do on Canon's, with my limited knowledge, is ten-times better then the tech's I've seen from Ikon or Canon Direct, or even some small shops that do Canons. Some of them think the Canon is just an oversized HP Printer. I keep on seeing them put HP Feed Rollers into the Feed Sections of Canons. They may fit, but they don't always work.

The deal I have found with Canon's is that, it's a good box, but sometimes, the systems can get really complicated to repair. More work to do on a Canon then for the same job on a Sharp. But then, I don't work on Canons all the time.

I usually have someone who does the work on the Canon's for me that I have out in the field. Here, I'm just trying to get through what should have been an easy re-build. All is good except the Drum's imaging issue.

What would you use to clean the Charge - Alcohol? What about the Drum Blade? Change that, as well?

[Tech2002]

Re: Canon IR-2220i Print Quality Issues

[QUOTE=Canon.Tech;242267]As a quick fix or fault finding fit the new drum cylinder to the old/working drum unit.

I'll give that a try if the Drum Unit they send me does the same thing as the other two I've tried. What about the roller that sits along side the Drum? If that is worn do you know if that would make a difference long term?

[Tech2002]

Re: Canon IR-2220i Print Quality Issues

OEM Drums have a warranty - follow instruction included & use it

Thanks - I wish I knew what the issue was. Never had this happen before.