i am trying the print/copy interface to a coin vend.
what are the hardware needed?
what are the hardware needed?
-
-
Re: C2020
You need gum gloves if you won't stay a live!If it ain't broke, don't fix it
A picture is worth a thousand words -
Re: C2020
what I meant is what are the cables and connectors needed to connect coin/card vend kiosk to c2020.Comment
-
Re: C2020
COPY CONTROL INTERFACE KIT-A1 [3726B001AA]
cost=MSRP-50.00 /Open Market=38.00
can not installed if Copy Card Reader C1 is installed
PIC SHOWS INTERFACE KIT-A1 SET-UP/
u also need a cable from your Coin Box vendor from exterior connector shown to Coin Box/ believe it a 9pin-male dvi
CCC1.jpg
3rd parties can connect control terminals to current Canon imageRUNNER
ADVANCE devices.
includes cost accounting terminals from Equitrac and other 3rd party cost accounting
devices such as Entrac as well as Coin Boxes.
Service Mode Level 2 > COPIER > OPTION > ACC > CC-SPSW to 1 to enable the Control Device
this pdf is also for C2020>>>TP09 431a[1].pdfLast edited by teckat; 09-25-2011, 05:25 AM.**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment
-
Re: C2020
Yeah?? Your model is IRA c2020?I'm not shore is this posible on this model.I work with this kit on this models:
compatibility_issue_cabling.pdfIf it ain't broke, don't fix it
A picture is worth a thousand wordsComment
-
**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
click on pic for better view
Comment