Pixma IP6700 no power traced to logic board...

[axyun]

Changed logic board and have power but error 6500. Any help is appreciated. Frank/ActionPhotocopy

[teckat]

Re: Pixma IP6700 no power traced to logic board...

AC adapter ?????

Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or more, also replace the bottom case unit -or the ink absorbers-when replacing the logic board ass'y.

Bottom case unit/Ink absorber-After replacement:
1. Reset the waste ink counter


After replacement:
1. Initialize the EEPROM.
2. Reset the waste ink counter.
3. Set the destination in the EEPROM.
4. Set the LCD viewer language.
5. Correct the CD-R and automatic print head alignment sensors.
6. Perform the print head alignment in the user mode.


Operation check:
EEPROM information print
- Service test print
- Printing via parallel or USB
connection
- Direct printing from a digital camera
- Direct printing from a memory card
- Print Beam printing

[axyun]

Re: Pixma IP6700 no power traced to logic board...

Thanks Teckat. I have the manual and tried the procedure for initializing eeprom but machine didn't respond. Iwas hoping I might get something not in manual that would help. Frank