If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
[Error Code]
IR 3230 - How do I empty the waste toner tank
I have just received a Canon IR3230. It states that the waste toner cartridge is full. Where do I find the waste toner tank on this unit and how do I empty/replace.
This printer is not under a maintenance contract. I don't understand why I need to call a Canon tech. There has to be a procedure that someone can share with me short of me having to call someone in and pay out the nose for something I can easily do with some guidance.
This printer is not under a maintenance contract. I don't understand why I need to call a Canon tech. There has to be a procedure that someone can share with me short of me having to call someone in and pay out the nose for something I can easily do with some guidance.
Check in your Operator's manual : It probably shows how to empty the WTB or if you do not have a manual and are NOT a tech...Call in a tech to handle this for you.
You can probably get the manuals ( IF YOU ARE A TECH ) from Manuals 4 U
"The Serenity Prayer" . . . God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .
thanks....I have the full compliment of manuals. I searched both the electronic media for the WTB and also paged through the paper manuals. There was no reference to it.
I would not have posted here prior to researching the manuals and various online sources.
This printer is not under a maintenance contract. I don't understand why I need to call a Canon tech. There has to be a procedure that someone can share with me short of me having to call someone in and pay out the nose for something I can easily do with some guidance.
U buy one new container/ FM2-0303-000)
emptying is a mess
WASTE.JPGWB.jpg
Point to note after attaching the waste toner
receptacle
After attaching the waste toner receptacle, move the
waste toner full detection lever up and down to
make sure that the lever is moved smoothly. Faulty
detection may be resulted if the lever is caught in
something and is not moved smoothly.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
U buy one new container/ FM2-0303-000)
emptying is a mess
Point to note after attaching the waste toner
receptacle
After attaching the waste toner receptacle, move the
waste toner full detection lever up and down to
make sure that the lever is moved smoothly. Faulty
detection may be resulted if the lever is caught in
something and is not moved smoothly.
Thank you so much for your answer. The pictures told me everything I needed to get this done. And I will certainly order a new recepticle rather than emptying.
Comment