know solving a error code

[Oze]

Re: know solving a error code

im a dr. but i have a canon ir 105+.

So NOT a copier technician?
The iR105+ is a complicated machine even for a tech with experience...best leave troubleshooting to the techs...after all I bet if I iasked you how to take out my own gallbladder you'll recomend me finding a doctor

[dr.mansoor]

Re: know solving a error code

are u a copier tech or a car mechanic working on a copier [ATTACH=CONFIG]14356[/ATTACH]

im a dr. but i have a canon ir 105+.

[dr.mansoor]

Re: know solving a error code

[ATTACH=CONFIG]14428[/ATTACH]

thanks.but my errors is 0993

[zoraldinho]

Re: know solving a error code

no.the screen changed ang give me thats error and switch power off and on.then i power off the system and copy was go on.but i dont know means of that errors.in service manual wasent thats error.

Capture_086.jpg

[dr.mansoor]

Re: know solving a error code

well one would be an error code....for example when you get an error the screen changes and gives you an error like E732-0001 switch power off and on. the other is a jam code where the paper jams in the machine. the screen shows you instructions on how to remove the jam and then your machine goes through a rotation cycle and warms back up to start the job again without power cycling. when you got those codes did you get them from service mode? if so what area in service mode did you get them from?

no.the screen changed ang give me thats error and switch power off and on.then i power off the system and copy was go on.but i dont know means of that errors.in service manual wasent thats error.

[zoraldinho]

Re: know solving a error code

It's a doctor.

[zoraldinho]

Re: know solving a error code

It's adoctor.

[teckat]

Re: know solving a error code

hiii. jam code.what means this codes?thanks

are u a copier tech or a car mechanic working on a copier


mr-fixit.jpg

[charm5496]

Re: know solving a error code

well one would be an error code....for example when you get an error the screen changes and gives you an error like E732-0001 switch power off and on.

the other is a jam code where the paper jams in the machine. the screen shows you instructions on how to remove the jam and then your machine goes through a rotation cycle and warms back up to start the job again without power cycling.

when you got those codes did you get them from service mode? if so what area in service mode did you get them from?

[dr.mansoor]

Re: know solving a error code

are those errors or jam codes?

hiii. jam code.what means this codes?thanks

[charm5496]

Re: know solving a error code

are those errors or jam codes?

[dr.mansoor]

know solving a error code

hi.my system show error codes 0993 and 0995 and 0996 and 0997 seperately.what is the problem?u know my system is ir 105+.thanks

[dr.mansoor]

canon ir 105 software

*hi. plz send me software of canon ir 105+ *. thanks

[vigour]

Re: know solving a error code

whats is the jam code.
how many copies on m/c
could be your duplex rollers or clutch
could be your inner delivery rollers.
could be a nick in the sensor actuator.

[dr.mansoor]

Re: know solving a error code

hi dear friend.plz send me chapter 2 and 3 of service manual.thanks and the paper jummed in dupplex of meshine.what is the problem? plz guide me for solving it.