canon clc5151

[kyocera.team]

dear all
i have problem with canon clc5151 it giving error code E000731
any idea

[Apach]

Re: canon clc5151

E731 UFR PCB error

3000 When the UFR PCB cannot be recognized at startup - Check the UFR PCB connections*. Replace the UFR PCB*. Replace the
3001 When the UFR PCB cannot be initialized at startup - main controller PCB.
3002 When the Rambus cannot be initialized
3015 When the image data do not reach the chip on the
main controller PCB (main) - Turn the main power OFF and back ON. Replace the UFR PCB*. Replace
the main controller PCB.

[teckat]

Re: canon clc5151

dear all
i have problem with canon clc5151 it giving error code E000731
any idea

Open Interface Board- take it out/clean ends/ re-seat