iR25xx s�ries display language issue.

[Rachid.Akli]

Hi again

We, recently, installed some of these machine models and we noticed that the only available display langage is english. I would like to re-install the system but i noticed that this could be done with an UST (canon user support tool) not an sst (canon service support tool). Is the UST a software to uppload or is it enabled automatically when we choose the download mode and plug the machine.

Thanks for any help.

Rachid.

[teckat]

The language can be changed only when [On] is pressed.
Press [v] or [^] until the desired language appears in the list select the
desired language.
Press [OK].

Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
The top screen is displayed in the selected language.

Language Switch -- choices
Bulgarian, Catalan, Croatian, Czech,
Danish, Dutch, English, Estonian, Finnish,
French, German, Greek, Hungarian, Italian,
Latvian, Lithuanian, Norwegian, Polish,
Portuguese, Romanian, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish

Entering Alphanumeric Characters
Whenever the on-screen keyboard is displayed, you are expected to enter alphanumeric characters.

IMPORTANTsome characters are restricted and cannot be entered.
Then set back ON

[Rachid.Akli]

[zoraldinho]

Procedure

1) Turn ON the power switch of the PC and start up the UST.

2) When the power switch is turned ON, a Found New Hardware Wizard appears. Click
[Cancel].

3) Enter the service mode. (add func.jpgkey > 2 Key > 8 Key >add func.jpg key)


4) Select [DOWNLOAD] by pressing the arrow key, then press the [OK] key.

MEMO:
You can also enter the download mode from the following user mode:
> System Settings > Firmware Upgrade > Yes

[Rachid.Akli]

[teckat]

WOW1.JPG

[zoraldinho]

images - Copy.jpg