IR4570 RemoteUI Contents is Not Found!!

[tenatal]

Re: IR4570 RemoteUI Contents is Not Found!!

is it okay if I defrag the HDD? (Hold 1 & 9 key) Will it do the trick?

Nothing will happen by doing this, there is no tricks like this.

Earlier posts by other user already show u the correct way.

[KL568]

Re: IR4570 RemoteUI Contents is Not Found!!

Hi,

Try to see if there version number for RUI under Service Mode topic ""Version"

If it a "--", that could be the issue you facing

[goldencup]

Re: IR4570 RemoteUI Contents is Not Found!!

is it okay if I defrag the HDD? (Hold 1 & 9 key) Will it do the trick?

[zoraldinho]

Re: IR4570 RemoteUI Contents is Not Found!!

Problem can be solved with SST and complete firmware.HDD is OK.

[Mina Banoub]

Re: IR4570 RemoteUI Contents is Not Found!!

Hi, I have iR4570 machines that when accessed through web always show:


RemoteUI Contents is Not Found!!


RUI Module Version : 3601


On one of the machine, I try to replace the hard disk taken from a good unit. The machine works and can now access the RUI. Does it mean my other unit has also a problem on HDD? Is it okay if I format the disk and clone it coz i don't have SST right now.
By the way i did an HDD check, all are OK!
Copying, Printing and Scanning are all okay, I just can't access the RUI.


Any other solution from this? (or maybe this is not an HDD problem ) Thank you very much.

Hi ,
I think that you have to download the RUI to your M/C using SST(batch download-singl mode) or You can make a copy from the firmware registersrd on the good HD that you have replaced, to your M/C`HD.

[goldencup]

Hi, I have iR4570 machines that when accessed through web always show:


RemoteUI Contents is Not Found!!

RUI Module Version : 3601


On one of the machine, I try to replace the hard disk taken from a good unit. The machine works and can now access the RUI. Does it mean my other unit has also a problem on HDD? Is it okay if I format the disk and clone it coz i don't have SST right now.
By the way i did an HDD check, all are OK!
Copying, Printing and Scanning are all okay, I just can't access the RUI.


Any other solution from this? (or maybe this is not an HDD problem ) Thank you very much.