hello all...

[browny]

hello all.
please tell me how to enter the IP address on canon IRC Advance C7055 (on the control panel )manually or DHCP.(Not required Admin.Log In) Thanks.

[teckat]

Re: hello all...

hello all.
please tell me how to enter the IP address on canon IRC Advance C7055 (on the control panel )manually or DHCP.(Not required Admin.Log In) Thanks.

Manually Setting an IP Address on imageRUNNER ADVANCE -------

u don't need to Login---

1) Hit Settings/Registration on the copier's display.

2) Select Login.

3) Enter the System Manager's ID as well as the System Pin.

4) Select login.

5) Select Preferences.

6) Select Network.

7) Select TCP/IP Settings.

8) Select IPv4 Settings.

9) Select Use IPv4 Settings to: ON.

10) Select IP Address Settings.

11) Enter an IP Address, Sub-net Mask, and Gateway address.

12) Select OK.

13) Select Logout.

[browny]

Re: hello all...

Manually Setting an IP Address on imageRUNNER ADVANCE -------

u don't need to Login---

1) Hit Settings/Registration on the copier's display.

2) Select Login.

3) Enter the System Manager's ID as well as the System Pin.

4) Select login.

5) Select Preferences.

6) Select Network.

7) Select TCP/IP Settings.

8) Select IPv4 Settings.

9) Select Use IPv4 Settings to: ON.

10) Select IP Address Settings.

11) Enter an IP Address, Sub-net Mask, and Gateway address.

12) Select OK.

13) Select Logout.

Thank you for Helping Me. but I forgot one thing is : LOG ON ICON :grey out....how to get that ICON can LOG IN.

[teckat]

Re: hello all...

did someone do a PWD-CLR

if so>>>
Problem can probably be resolved by performing MMI clear.
Note: User info will be lost.

Before clearing MMI, print out an Output Report via Settings/Registration > Preferences > Network > Output Report.
Next go to Copier > Function > Clear > MMI clear > OK, then Power cycle machine Off and then back On.

When the machine comes back up the Log In button will be able to be triggered.

Re-enter Network information:
Go to Preferences > Confirm Network connection Set changes and Turn On > TCP/IP settings > IPv4 Settings > IP Address Settings and re-enter information. Close the window and re-boot copier to a working condition.


imageRUNNER ADVANCE Models which requires LOGIN of System Manager ID and PIN.
The default setting for the System Manager ID is "7654321" and Password is "7654321"

[browny]

Re: hello all...

did someone do a pwd-clr

If so>>>
problem can probably be resolved by performing mmi clear.
note: User info will be lost.

before clearing mmi, print out an output report via settings/registration > preferences > network > output report.
next go to copier > function > clear > mmi clear > ok, then power cycle machine off and then back on.

when the machine comes back up the log in button will be able to be triggered.

re-enter network information:
go to preferences > confirm network connection set changes and turn on > tcp/ip settings > ipv4 settings > ip address settings and re-enter information. Close the window and re-boot copier to a working condition.


Imagerunner advance models which requires login of system manager id and pin.
The default setting for the system manager id is "7654321" and password is "7654321"

thank you very much....it's working now.

[teckat]

Re: hello all...

COLOR HAND.jpgWELCOME