latches to the T1 finisher

[Guest]

Hi guys, can someone help me? I need the latches to the T1 finisher and can not find the code. In the attached document specific parts required.

[teckat]

Re: latches to the T1 finisher

Hi guys, can someone help me? I need the latches to the T1 finisher and can not find the code. In the attached document specific parts required.

Part numbers for the Mounting Bracket hardware shown on figure Q01 in the part catalog-They attach the Puncher Unit-L1/M1/N1/P1 to the machine frame.


Front Positioning Plate is FL2-0913-000 and the
Rear Positioning Plate is FC5-4076-000.

[Eddias]

Re: latches to the T1 finisher

Thanks,

teckat, you are the best here.

[Eddias]

Re: latches to the T1 finisher

I got a newer version of the PC and it contained the codes I needed, but are different from those you gave me. look

[teckat]

Re: latches to the T1 finisher

I got a newer version of the PC and it contained the codes I needed, but are different from those you gave me. look

Sorry, thought u were attaching a Puncher Unit/ that is the pic u first posted- that first pic is shown with Puncher
Puncher unit L1_M1_N1_P1 Attachment parts.pdf

If u plan to attach a T1 w/a Puncher > the attach plates are different & placed on Puncher as shown below === A-B

T1 installed aloneuses what u now show in pic = #9 & 10 is same as 302 & 303=Placement locations on T1 are shown as D & E

click on pics for better view/
T1 FINISHER.JPGT1 Finisher w_Puncher attached.JPG

[Eddias]

Re: latches to the T1 finisher

Sorry, I had not really made it clear that the finisher is stand alone without the puncher.
Anyway Thanks for your attention.
You're still the best here

case closed.