Paper jams only while duplexing, whenever duplexer is used first side prints fine, but jams when it is sucked back into print second, single side is ok
the paper stop at the same place regardless the format used A4, A4r, A3. jam 124 is displayed
the trailing edge of the copy leaves the Duplex print paper sensor 1 (SR1002)
when changing direction, the copy hits the top of the guide and jams.
Have replaced duplexer unit and DC controler.
any idea ?
someone has the timing chart for duplexing ?
Sorry for my poor english
the paper stop at the same place regardless the format used A4, A4r, A3. jam 124 is displayed
the trailing edge of the copy leaves the Duplex print paper sensor 1 (SR1002)
when changing direction, the copy hits the top of the guide and jams.
Have replaced duplexer unit and DC controler.
any idea ?
someone has the timing chart for duplexing ?
Sorry for my poor english