ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mi109
    Technician
    • Apr 2013
    • 27

    #16
    Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

    Originally posted by Canon.Tech
    I think this is what you need https://mega.co.nz/#!JcNXXRhC!WPdX1X...W7xn0heQDVnjMU you need to open the link in Chrome
    Already have that i just need the upgrade discs.

    Comment

    • BShurilla
      Technician
      • Apr 2013
      • 16

      #17
      Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

      ok, the second 2 disks are uploading to my dropbox, but the first two are too big, so I am trying to figure out where to upload them..

      I'm just gonna .rar them and split each disk .rar in two so they will fit..

      Comment

      • ZOOTECH
        Senior member of CRS

        Site Contributor
        2,500+ Posts
        • Jul 2007
        • 3375

        #18
        Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

        Originally posted by BShurilla
        ok, the second 2 disks are uploading to my dropbox, but the first two are too big, so I am trying to figure out where to upload them..

        I'm just gonna .rar them and split each disk .rar in two so they will fit..
        The free version of Dropbox is limited to 300MB upload, I've tried SoShare.com for up to 1TB upload.
        "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • mi109
          Technician
          • Apr 2013
          • 27

          #19
          Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

          Originally posted by BShurilla
          ok, the second 2 disks are uploading to my dropbox, but the first two are too big, so I am trying to figure out where to upload them..

          I'm just gonna .rar them and split each disk .rar in two so they will fit..
          mega.co.nz is my fav so far.

          Comment

          • BShurilla
            Technician
            • Apr 2013
            • 16

            #20
            Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

            here are the second two disks, FK2-4437 and FK2-4468



            uploading the first two, regular iso's to mega.co.nz

            Comment

            • BShurilla
              Technician
              • Apr 2013
              • 16

              #21
              Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

              and all 4 on mega.co.nz

              FK2-4435 - https://mega.co.nz/#!0k0SAJwA!JJAw2F...5H6wwRUWv2_rNs
              FK2-4436 - https://mega.co.nz/#!91c1AYqS!CpRGWR...Q7K14cI3epFpgg
              FK2-4437 - https://mega.co.nz/#!BtEEBTgb!MYdy0n...R_BMA54v9Fwk-M
              FK2-4468 - https://mega.co.nz/#!45VE3DYa!WJJJpD...JlxFepkBmWjDAE

              All four
              Last edited by BShurilla; 04-16-2013, 11:50 PM.

              Comment

              • mi109
                Technician
                • Apr 2013
                • 27

                #22
                Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

                For Poops and Giggles i hooked up the monitor to the Fiery Server for the upgrade process. Now my question is what usb port is "A" the left port or the Right port? The reason i ask because ive got on the monitor EBIOS Boot Error - Boot Error keeps blinking across the screen!?

                Comment

                • KenB
                  Geek Extraordinaire

                  2,500+ Posts
                  • Dec 2007
                  • 3944

                  #23
                  Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

                  Originally posted by mi109
                  For Poops and Giggles i hooked up the monitor to the Fiery Server for the upgrade process. Now my question is what usb port is "A" the left port or the Right port? The reason i ask because ive got on the monitor EBIOS Boot Error - Boot Error keeps blinking across the screen!?
                  Forget trying to use a monitor on this RIP - it's disabled in the BIOS.

                  The only Fieries which can support a monitor are the higher end, Windows based models (this one is Linux) with the optional FACI (Fiery Advanced Controller Interface) kit.
                  “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

                  Comment

                  • mi109
                    Technician
                    • Apr 2013
                    • 27

                    #24
                    Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

                    So what your saying is the upgrade process wont work unless i unplug the monitor?

                    Comment

                    • riemsllc

                      #25
                      Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

                      I just bought a used ImageRunner c5185 machine from a local town at auction for $100 because the document feeder didn't work any more (replaced for $45 on ebay). Im trying to use the vue software and it will only work on a 2.0 software. Thank you very much for this and the usb upgrade file. Is there any directions how to do this now. I really need to use the vue software. How can I find the versions of the controllers I have now and what hardware upgrades need to be made.

                      Thank you very very much.

                      Comment

                      • beaker020
                        Technician

                        50+ Posts
                        • Mar 2006
                        • 63

                        #26
                        Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?


                        I know this post is 2 years old but could you repost this? The links have expired.
                        Thanks
                        Lance

                        Comment

                        • beaker020
                          Technician

                          50+ Posts
                          • Mar 2006
                          • 63

                          #27
                          Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

                          Never mind. Found my copy.

                          Comment

                          • BShurilla
                            Technician
                            • Apr 2013
                            • 16

                            #28
                            Re: ImagePASS-H1 Version 1.0 Upgrade 2.0 Firmware?

                            Here is a repost of the links: https://mega.nz/#F!s9VUmbqT

                            Comment

                            Working...